Type No.:MAG-Bimetallic Bolted straight Terminals Lug cable to flat STL
This clamp-type bimetallic terminal with hex head clamping
bolts was suit for connecting copper or aluminum cable to copper
or aluminum flat pad combinations.
Side formed pads are standard for flush mounting. tongues
are standard to allow clearance for flush mounting.
And it is normally supplied with blank palm.
1 or 2 bolt drillings can be supplied to customers' specifications.
Clamping bolts have hex-stops for one-wrench installation.

Material:
Clamp body: copper& aluminum alloy
Clamping hardware: steel, hot dip galvanized
Bolts buts washer: steel, hot dip galvanized
 
Model & spec Applicable conductor Terminals Dimensions(mm)
L a L1 L2
STL-1A/1B
STL-2A/2B
STL-3A/3B
STL-4A/4B
STL-5A/5B
STL-6A/6B
STL-7A/7B
STL-8A/8B
35~50
70~95
35~50
70~95
120~150
185~240
120~150
185~240

One hole


Two holes


Four holes

120
135
145
175
225
225
239
239
65
80
65
80
125
125
125
125
42
45
65
80
85
85
85
85
40
40
40
40
50
50
80
80

Note: 30° & 90° Angle connectors may be obtained by specifying desired angle. You can add letter B or C with the
catalogue number. For example, SL-1A was 0° Angle connectors, and SL-1B was 30° angle connectors,
and the SL-1C was 90° angle connectors

Model & spec Number of bolts Applicable conductor Dimensions(mm)
L a L1 L2
SLG-1A/1B
SLG-2A/2B
SLG-3A/3B
SLG-4A/4B
4
4
6
6

35~50
70~95
120~150
185~240

145
175
225
225
65
80
125
125
60
70
80
80
40
40
50
50
Note: 30°& 90°angle connectors may be obtained by specifying desired angle. You can add letter B or C with the cat No.For
example, SLG-1A was 0°angle connectors, and SLG-1B was 30°angle connectors, and the SLG-1C was 90°angle connectors.
return