Type No.:MAG-Parallel groove connectors AL/CU
The aluminium clamp with a friction welded copper insert clearly
marked in blue for making copper conductor connections.
The clamps have serrated transverse grooves for maximum
conductor contact, use dacromet steel bolts and utilise
belleville washers to prevent thermal ratcheting under cyclic loads.
Interface between aluminium clamp body and tap copper shape
is protected.The clamps are coated with an oxide inhibitor.
And hot-dip galvinized steel bolts and nuts was on requirment,
also we can change to stainless bolts and nuts with washers.
Material:
Body:High strength corrosion resistant aluminium and copper-alloy
Bolts: DIN 933, steel, 8.8, Dacromatized
Nuts: DIN 934, steel, Dacromatized. pressed into lower clamp body
Spring DIN 127, steel, Dacromatized
washers: Dacromatized.
cat no Type Conductor Range No./Size
of Bolts
Aluminium Run Copper Tap  
mm2 O.D mm2 O.D  
CU2.5-10AL16-70-1
CU6-50AL16-70-1
CU6-50AL16-70-2
CU6-50AL16-70-3
CU6-50AL25-150-1
CU2.5-10AL25-95-2
CU6-35AL25-95-2
CU6-35AL35-120-2
CU25-150AL35-120-2
CU10-95AL25-150-2
CU10-95AL25-150-3
CU16-185AL35-200-2
CU16-185AL35-185-3
CU35-200AL35-200-3
CU35-240AL50-300-2
CU35-240AL35-300-3
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
16-70
16-70
16-70
16-70
25-150
25-95
25-95
35-120
35-120
25-150
25-150
35-200
35-185
35-200
50-300
35-300
5.1-11.7
5.1-11.7
5.1-11.7
5.1-11.7
6.3-15.7
6.3-12.5
6.3-12.5
7.5-14.0
7.5-14.0
6.3-15.7
6.3-15.7
7.5-18.4
7.5-17.5
7.5-18.4
9.0-23.0
7.5-22.5
2.5-10
6-50
6-50
6-50
6-50
2.5-10
6-35
6-35
25-150
10-95
10-95
16-185
16-185
35-200
35-240
35-240
1.8-4.1
2.7-9.0
2.7-9.0
2.7-9.0
2.7-9.0
1.8-4.1
2.7-7.5
2.7-7.5
6.3-15.7
4.1-12.5
4.1-12.5
5.1-17.5
5.1-17.5
7.5-18.4
7.5-20.3
7.5-20.3
1 X M8
1 X M8
2 X M8
3 X M8
1 X M8
2 X M8
2 X M8
2 X M8
2 X M8
2 X M8
3 X M8
2 X M8
3 X M8
3 X M8
2 X M8
3 X M8
Options: F-X-G
·F(ex. CAPG16-70F): Shear head screw
·X(ex. CAPG16-70X...): Stainless steel screws.
·G(ex. CAPG16-70G.): Hot-dip galvanized steel screws.
Note: 1. Type: F = Forged body; T = Transverse groove
2. that the clamp is provided with corrosionproof stainless steel screws and
hot-dip galvanized steel screws instead of dacromet screws. add suffix “X”
for stainless steel screw. Add suffix “G” for hot dip galvanized steel screws.
 
return