Type No.:MAG-Parallel groove connectors AL/AL

The forged aluminium clamps wasuse for aluminium to
aluminium connection throughout the conductor range.
The clamps have serrated transverse grooves for maximum
conductor contact, use dacromet steel bolts and utilise belleville
washers to prevent thermal ratcheting under cyclic loads.
The clamps are coated with an oxide inhibitor.
And hot-dip galvinized steel bolts and nuts was on requirment,
also we can change to stainless bolts and nuts with washers.

Material:
Body:High strength corrosion resistant aluminium
Bolts: DIN 933, steel, 8.8, Dacromatized
Nuts: DIN 934, steel, Dacromatized. pressed into lower clamp body
Spring:DIN 127, steel, Dacromatized
washers: Dacromatized.

cat no Type Bolt
Torque
Conductor Range No./Size
of Bolts
Aluminium Run
mm2 O.D
AL6-35-2
AL16-70-1
AL16-70-2
AL16-95-2
AL16-150-1
AL16-150-2
AL25-185-2
AL16-150-3
AL25-200-3
AL30-300-3
AL95-240-3
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
13Nm
22Nm
22Nm
22Nm
22Nm
22Nm
29Nm
22Nm
29Nm
29Nm
29Nm
6-35
16-70
16-70
16-95
16-150
16-150
25-185
16-150
25-200
30-300
95-240
2.7-7.5
5.1-11.7
5.1-11.7
5.1-12.5
5.1-15.7
5.1-15.7
6.3-17.5
5.1-15.7
6.3-18.9
7.5-22.5
12.5-20.3
2 X M6
1 X M8
2 X M8
2 X M8
1 X M8
2 X M8
2 X M10
3 X M8
3 X M10
3 X M10
3 X M10
Options: F-X-G
·F(ex. APG16-70F): Shear head screw
·X(ex. APG16-70X...): Stainless steel screws.
·G(ex. APG16-70G.): Hot-dip galvanized steel screws.
Type: F = Forged body; T = Transverse groove; E = Extruded body; N = No groove.
2. that the clamp is provided with corrosionproof stainless steel screws and hot-dip
galvanized steel screws instead of dacromet screws. add suffix “X” for stainless steel screw.
Add suffix “G” for hot dip galvanized steel screws.
return