Type No.:MAG-Parallel groove connectors CU/CU
Parallel Groove Clamps Copper Extruded type,

The clamp was designed to connect two parallel bare conductors.
Conductors can be copper stranded or rods. Material is forged
copper for copper to copper connection throughout the conductor
range. The clamps have serrated transverse grooves for maximum
conductor contact, use copper bolts and utilise Belleville washers
to prevent thermal ratcheting under cyclic loads.
The clamps are coated with an oxide inhibitor. And stainless bolts
and nuts with washers was on requirement.

for tap-off connections of copper-conductors acc. to DIN 48201
Material:
Body: Copper alloy
Bolts: steel or stainless steel
Nuts: DIN 934, steel
Surface: uncoated
 

Product Selection Matrix
cat no Type Bolt
Torque
Conductor Range
2 mm
Dimensions mm
O.D
No./Size of Bolts
CU6-70-2
CU16-95-2
CU16-150-2
CU150-240-2
CU300-400-3
F/ T
F/ T
F/ T
E/N
E/N
20Nm
20Nm
30Nm
40Nm
40Nm
6to70
16 to 95
16 to 150
150 to 240
300 to 400
2.7 to 10.5
5.1 to 12.5
5.1 to 15.7
15.7 to 20.3
22.6 to 26.7
2xM8
2xM8
2 x M10
2 x M12
3 x M12
Type: F = Forged body; T = Transverse groove; E = Extruded body; N = No groove.
2. that the clamp is provided with corrosionproof stainless steel screws and hot-dip galvanized steel screws instead of dacromet screws.
Add suffix “X” for stainless steel screw. Add suffix “G” for hot dip galvanized
return