Type No.:MAG-Aluminum PG clamp Extrude type
These connectors use for aluminium or steel to aluminium
connection, where no mechanical tension is involved.
The SL type was basic type, and PGS and PGT type with
the teeth groove ,so it can grip the conduct without stripping
conductor's insulating cover. The patented lower section of
the body protects the bolts from corrosion and makes the
tightening of the bolts easy with wrench. The correct tightening
torque is essential to the connection.
The connectors are made of corrosion-resistant aluminium alloy;
The 8.8 bolts are dacromet. All connectors is equipped with
springs to make the installation even easier.
Material:
Body/ Plate:High strength, corrosion resistant aluminium-alloy
Bolts: DIN 933, steel 8.8, Dacromatized
Nuts: DIN 934, steel, Dacromatized
Surface: uncoated
SL Type
Conductor Cross Section
sq.mm
Conductor Diameter
φmm
AL
6-25
16-40
16-70
35-95
40-120
70-240
AL
2.7-5.3
5.1-8.0
5.1-11.7
7.5-12.5
8.0-14.0
11.7-20.3
PGS Type
Part No. Main conductor
2 AI mm
Branch conductor
2 AI mm
Tightening
torque Nm
PGS 35-150 35-150 40
PGT Type
Part No. Main conductor
2 AI mm
Branch conductor
2 AI mm
Bolts
PGT 16-120 16-120 2×M8
V Type

Conductor Cross Section
sq.mm
Conductor Diameter
φmm
AL
16-25
35-50
40-100
100-150
AL
5.1-6.3
7.5-9.0
7.5-14.0
13.0-15.70

 
return