Type No.:MAG-Insulation Piercing Connectors NTD
This type connector was use to tap an insulated conductor from a low voltage aerial bare overhead line. And it use for contact live
or dead line work. The main line was for overhead bare Copper or Aluminum conductor , and the tap line was insulated Copper or
Aluminum conductor . The connector body is made of high mechanical and weather resistant insulating material, tight bolts is processed
by anti-corrosion treated and equipped with tight torque nut so that it can be installed simply, safety and fast. The stable piercing
pressure can assure the cable connection up to a perfect effecting. The main line and tape line tight separately, the complete
connector do not exist any loosen parts. The branch can be on the left or on the right. The insulation piercing contact teeth on tap
side with neutral grease and according to models made of: copper alloy (F model), tinned copper alloy (EF model), alum alloy
(AF model).
TYPE Applicable conductor range mm2
Main line
2 section mm
Insulated tap
2 ALu/Cu mm
NTD50-35F
NTD50-35AF
NTD50-35EF
NTD301F
NTD301AF
NTD301EF
NTD151F
NTD151AF
NTD151EF
Cu. 7-54
Alu. 7-54
7-54
Cu. 7-95
Alu. 7-95
7-95
CU16-95
AL16-95
16-95
6-35
6-35
6-35
35-95
35-95
35-95
2.5-35
2.5-35
2.5-35
return