Type No.:MAG-Piercing Arc-protection connetcor
Application
Overhead insulated conductors to prevent the disconnection
lightning protection device is suitable for copper, aluminum
overhead insulated conductor.
Model &
Specification
Range of wire
cross-sectional
area (mm2)
CFH-10/5(50-240) 50-240

Parameters
1. Full-wave lightning impulse withstand voltage(peak)KV:100
2. 1min power frequency withstand voltage (RMS) KV:50
3. Frequency arc current (rms) KA:12.5
4. Puncture site has a unique waterproof coated insulating paste

Fitting Instruction
This product is installed on the load side line insulator with
alternating torque wrench, tighten the nut symmetry, in which
case the outer conductor should be close to the groove bottom
of the tooth puncture wire insulation should be piercing the
internal conductive layer and the conductor in close connection;
and online clip stands guard outside to install insulation,
with a fixed deduction fixed. Insulation shields installed to
install from the size, see above diagram.

return