Type No.:MAG-Dogbone Vibration Damper(Application Instruction)
Application Instruction
-Dogbone Damper
1. Position the Dogbone damper
on to the conductor as shown.
2. Align the centre mark of the
first retaining rod on the
centre of the hook. Crown land
slightly behind the crown
so that the rod pushes the
hook against the conductor
3. Wrap the retaining rod around
the conductor both sides of
the hook.
4. At this point,check that the rod has
been applied so that it terminates on
the inside of the conductor bundle.
Align the centre mark of the second
rod on the hool crown approx 8mm
away from the first one and continue
to wrap on the second rod.
return