Type No.:MAG-600 amp deadbreak elbow THDE
600 Amp deadbreak connector Products
The 600 amp Deadbreak Elbow and accessories offer an easy and
reliable method of terminating and splicing main feeder circuits.
The Deadbreak Elbow is a fully shielded, molded rubber connector.
The Deadbreak Elbow is designed to terminate power cables with
copper or aluminum conductors ranging in sizes. It may be
installed on any 600 amp rated (aluminum) apparatus bushing
Separable Insulated Connectors. Cable adapters accommodate
power cable insulation diameters from18.3mm to 39.6mm.
Conformance to this industry standard ensures mechanical and
electrical interchangeability with other products of manufacturers
that are also in conformance with the standard.
Electrical Ratings
Continuous Current Rating (Aluminum Components)……600 amps
Voltage Class………………………………………………15KV/25kV
Max Phase to Ground Voltage - Operating Voltage…8.3KV/15.2kV
Max Phase to Phase…………………………………14.4KV/26.3kV
Basic Impulse Level………………………………………95KV/125kV
Corona Extinction (3pC)……………………………………11KV/19kV
DC Withstand Voltage (15 min.)……………………………3KV/78kV
24 Hour Overload…………………………………………1,000 A rms
600 amp Deadbreak Elbow
      SELECTION AND ORDERING
Cat
Number
 
  Conductor
Cross
section mm2
Outer
diameter for
conductor mm
THDE-15/600-50
THDE-15/600-70
THDE-15/600-95
THDE-15/600-120
THDE-15/600-150
THDE-15/600-185
THDE-15/600-240
THDE-15/600-300
THDE-15/600-400
THDE-15/600-500
THDE-25/600-50
THDE-25/600-70
THDE-25/600-95
THDE-25/600-120
THDE-25/600-150
THDE-25/600-185
THDE-25/600-240
THDE-25/600-300
THDE-25/600-400
THDE-25/600-500
50
70
95
120
150
185
240
300
400
500
 
218.3-21.5
19.9-24.6
19.9-24.6
23.1-27.1
23.1-27.1
24.9-29.0
27.4-32.5
27.4-32.5
31.0-36.1
34.5-39.6
Select the elbow according the cable outer dimension.
The connector has copper type and aluminum type on requirement.
return