Type No.:MAG-Wedge type tension clamps

NXL Series strain clamp is suitable for distribution wire up to
10kV, firstly,fix the aerial insulation aluminium conductor or
naked aluminium conductor on the rotate angle or insulator of
terminal strain pole,and then fix and tight the aerial conductor.
The inner wedge is made of high strength aluminum through
heat treatment; the outside shield was made from good climate
resistance insulating material.
This product was belonging to power-saving anchor clamp.

Structure Feature
1. Choose the unmagnetic chatacter high-intersity
oxidate-resistanle aluminium alloy,No waste electric energy
2. Wedged-Locked structure easy-installation
3.An arc embraces the most part,conductor cannot change.
Large grip strength.
4. No waste electric energy.


Insulation Cover Performance Feature
1. Withstand voltage: ≥ 18kV keep voltage one minute
not breakdown
2. Insulation resistance:> 1.0×1014Ω
3. Environments temperature:-30℃ ~90℃

Catalogue
Number
Applicable cable
2 cross ction(mm )
Length L1
(mm)
Grip strength
(kN)
Failure load
(kN)
Insulation
cover type

NXL-1


NXL-2

NXL-3

NXL-4

50
70
95
120
150
185
240
22.5~27.5

245


255

300

320

5.16
7.12
9.40
12.70
15.20
18.50
23.60
55

14.50


23.40

36.30

61

NXL-95


NXL-150

NXL-240

NXL-4

return