Type No.:MAG-Cover Plate Tension Clamps
This type is particularly characterized by its lightweight since both the connecting piece and the wedges are made of glass
fiber reinforced plastic. Another advantage is the straight cable inlet, ensuring that no damage will occur to the conductor
insulation. On this type, tightening the bolts will give sufficient holding strength however further tension on the outer clamping
wedges will move them in the direction of the tensional force, so applying an increase in the clamping force on to the conductor
bundle. The cover plates together with the tension bolts allow the clamps to be installed in a closed eyebolt. By using this model
you can fix two clamps in one eye or hook.

TYPE
TORQUE TERMS OF USE
5011/3F
5011/4F/25
46
46
4 x 50 - 120
4 x 50-120 + 1/2 x 16-35
return